Printer Switches - Ricoh D3D9 Field Service Manual

4.Service Tables
1: On. Files received via SMTP are delivered immediately to their destinations.
1 Set to select the signature when receiving SMTP mail.
0: No sign
1: Always sign
2 Set to encrypt the data when receiving SMTP mail.
0: No encryption
1: Encryption
3-7 Not used

Printer Switches

Printer Switch 00 (SP No. 1-103-001)
No Function
0 Select page separation
marks
0: Off
1: On
1 Repetition of data when the
received page is longer than
the printer paper
0: Off
1: On
2 Prints the date and time on
received fax messages
0: Disabled
1: Enabled
3- Not used
7
Printer Switch 01 (SP No. 1-103-002)
No Function
0- Not used
88
Comments
0: If a 2 page RX transmission is split, [*] is printed in the bottom right
corner of the 1st page and only a [2] is printed in the upper right corner of
the 2nd page.
1: If a 2 page RX transmission is split into two pages, for example, [*] [2]
is printed in the bottom right corner of the 1st page and only a [2] is
printed in the upper right corner of the 2nd page.
•
This helps the user to identify pages that have been split because
the size of the paper is smaller than the size of the document
received. (When A5 is used to print an A4 size document, for
example.)
1: Default. 10 mm of the trailing edge of the previous page are repeated at
the top of the next page.
0: The next page continues from where the previous page stopped without
any repeated text.
This switch is only effective when user parameter 02 - bit 2 (printing the
received date and time on received fax messages) is enabled.
1: The machine prints the received and printed date and time at the bottom
of each received page.
Do not change the settings.
Comments
Do not change the settings.