Ricoh D3D9 Field Service Manual page 90

4.Service Tables
Only one of these can be received for use in the subject line.
1: Puts the RTI/CSI registered on this machine in the Subject line.
When this switch is used to transfer and deliver mail to a PC, the information in the Subject line that
indicates where the transmission originated can be used to determine automatically the destination folder
for each e-mail.
1-7 Not Used
I-fax Switch 05 (SP No. 1-102-006)
No Function
0 Mail Addresses of SMTP Broadcast Recipients
Determines whether the e-mail addresses of the destinations that receive transmissions broadcasted using
SMTP protocol are recorded in the Journal.
For example:
"1st destination + Total number of destinations: 9" in the Journal indicates a broadcast to 9 destinations.
0: Not recorded
1: Recorded
1 IFAXTX Retries
Determines whether the machine retries sending IFAX when connection and transmission fails due to
errors.
0: Disabled
1: Enabled
2-7 Not Used
I-fax Switch 06 - Not used (do not change the settings)
I-fax Switch 07 - Not used (do not change the settings)
I-fax Switch 08 (SP No. 1-102-009)
No Function
0-7 Memory Threshold for POP Mail Reception
This setting determines the amount of SAF (Store and Forward) memory. (SAF stores fax messages to
send later for transmission to more than one location, and also holds incoming messages if they cannot be
printed.) When the amount of SAF memory available falls below this setting, mail can no longer be
received; received mail is then stored on the mail server.
00-FF (0 to 1024 KB: HEX)
The hexadecimal number you enter is multiplied by 4 KB to determine the amount of memory.
I-fax Switch 09 (SP No. 1-102-010)
No Function
86
Comments
Comments
Comments