Ricoh D3D9 Field Service Manual page 32

1.Installation
Installing the fax connection unit
•
Before starting this procedure, connect the network cable to the target machine(s), and then configure
the network settings.
•
When installing more than one SD card, perform the merge operation. For details about how to merge,
refer to "Card Appli Move" in the field service manual for the main frame.
1. Remove the SD card slot covers [A].
2.
Insert the Fax Connection Unit SD card into SD card slot 1 [A: Upper Slot].
3.
Reattach the SD-card slot cover (
4. Turn ON the main power.
5.
Make sure that the machine can recognize the option (See 'Self-Diagnosis Report' and check whether the
aics firmware (D3D85759) is listed in [Loading Program].)
Registering the client machine(s)
•
Before starting this procedure, connect the network cable to the target machine(s), and then configure
the network settings.
1.
On the remote machine, press the [User Tools/Counter] key on the operation panel.
2. Press [System Settings].
3.
Press [Administrator Tools].
4. Press [Program/Change/Delete Remote machine].
5.
Enter the IP address or host name of the client machines.
28
x 1).