Ip-Fax Specifications - Ricoh D3D9 Field Service Manual

6.Specifications

IP-FAX Specifications

IP-FAX Specifications
Network:
Scan line density:
Maximum Original size:
Maximum scanning size:
Transmission protocol:
Compatible machines:
IP-Fax transmission
function:
IP-Fax reception function:
176
Local Area Network
Ethernet/10base-T, 100base-TX
Gigabit Ethernet/1000 Base-T
IEEE802.11a/b/g/n (wireless LAN)
8 x 3.85 lines/mm, 200x100dpi (standard character),
8 x 7.7lines/mm, 200x200dpi (detail character),
8 x 15.4lines/mm (fine character: optional expansion memory required),
16 x 15.4lines/mm, 400x400dpi (super fine character: optional expansion memory
required)
A3 or 11" x 17" (DLT)
Custom: 297mm x 1200mm (11.7" x 47.3")
297mm x 1200mm (11.7" x 47.3")
Recommended: T.38, TCP, UDP/IP communication, SIP (RFC 3261 compliant),
H.323 v2
IP-Fax compatible machines
Specify IP address and send faxes to an IP-Fax compatible fax through a network.
Also capable of sending faxes from a G3 fax connected to a telephone line via a
VoIP gateway.
Receive faxes sent from an IP-Fax compatible fax through a network.
Also capable of receiving faxes from a G3 fax connected to a telephone line via a
VoIP gateway.