Ricoh D3D9 Field Service Manual page 96

4.Service Tables
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0E (SP No. 1-103-015)
No Function
0* Paper size selection priority
0: Width
1: Length
1* Paper size selected for printing
A4 width fax data
0: 8.5" x 11" size
1: A4 size
2 Page separation
0: Enabled
1: Disabled
3- Printing the sample image on
4 reports
Bit Bit Setting
4 3
0 0 The upper half
only
0 1 50% reduction
(sub-scan only)
1 0 Same size
1 1 Not used
5- Not used
6
7 Equalizing the reduction ratio
among separated pages
(Page Separation)
0: Enabled
1: Disabled
* This setting can be used for the client machine which has no FCU.
Printer Switch 0F (SP No. 1-103-016)
No Function
0- Smoothing feature
92
Comments
0: A paper size that has the same width as the received data is selected
first.
1: A paper size which has enough length to print all the received lines
without reduction is selected first.
This switch determines which paper size is selected for printing A4
width fax data, when the machine has both A4 and 8.5" x 11" size
paper.
1: If all paper sizes in the machine require page separation to print a
received fax message, the machine does not print the message
(Substitute Reception is used).
After a larger size of paper is set in a cassette, the machine
automatically prints the fax message.
"Same size" means the sample image is printed at 100%, even if page
separation occurs.
User Parameter Switch 19 (13H) bit 4 must be set to "0" to enable this
switch.
Refer to "Detailed Descriptions" for more details.
Do not change the settings.
0: When page separation has taken place, all the pages are reduced
with the same reduction ratio.
1: Only the last page is reduced to fit the selected paper size when
page separation has taken place. Other pages are printed without
reduction.
Comments
(0, 0) (0, 1): Disable smoothing if the machine receives halftone images