Ifax Specifications - Ricoh D3D9 Field Service Manual

6.Specifications

IFAX Specifications

IFAX Specifications
Connectivity:
Resolution:
Transmission
Time:
Document Size:
E-mail File
Format:
Protocol:
Data Rate:
Authentication
Method:
Remark:
174
Local area network
Ethernet 100base-Tx/10base-T
Gigabit Ethernet 1000 Base-T
IEEE802.11a/b/g/n (wireless LAN)
200 × 100 dpi (Standard resolution), 200 × 200 dpi (Detail resolution), 200 × 400 dpi
(Fine resolution)*1, 400 × 400 dpi (Super Fine resolution)*1
•
To use 200 × 400 dpi and 400 × 400 dpi, IFAX SW01 Bit 2 and/or bit 4 must
be set to "1".
1 s (through a LAN to the server)
Condition: ITU-T #1 test document (Selerexe Letter)
MTF correction: OFF
TTI: None
Resolution: 200 x 100 dpi
Communication speed: 10 Mbps
Correspondent device: E-mail server
Line conditions: No terminal access
Maximum Original Size: A3/DLT.
•
To use B4 and A3 width, IFAX SW00 Bit 1 (B4) and/or Bit 2 (A3) must be set
to "1".
Single/multi-part
MIME conversion
Image: TIFF-F (MH, MR, MMR)
Transmission:
SMTP, TCP/IP
Reception:
POP3, SMTP, IMAP4, TCP/IP
1000 Mbps (1000 Base-T)
100 Mbps (100base-Tx)
10 Mbps (10base-T)
SMTP-AUTH
POP before SMTP
A-POP
The machine must be set up as an e-mail client before installation. Any client PCs