Fax Connection Unit Type M26 (D3D8-01, 02, 03); Accessory Check; Installation Procedure - Ricoh D3D9 Field Service Manual

Fax Connection Unit Type M26 (D3D8-01, 02, 03)

Accessory Check

Check the quantity and condition of the accessories against the following list.
No.
1 Fax Connection Unit SD card

Installation Procedure

This unit allows a machine without the fax unit installed (client machine) to send and receive faxes via a machine
with the fax unit installed (remote machine).
Requirements
•
Up to six machines can be registered as the client machines.
•
Machines that already have a fax unit installed cannot be used as client machines.
•
Only one machine can be registered as the remote machine.
•
Firmware for this unit: "aics" (software number: D3D85759)
•
Remote Fax transmission is possible using a G3 line.
•
The Remote Fax function does not support User Code Authentication. Disable the User Code Authentication
on the remote machine.
•
Use this function to check the contents of a file that is stored in memory and not yet sent. Also, use this
function to cancel a transmission from the client machine.
Order of installation
1. Install the Fax Connection Unit in the remote machine (fax unit already installed).
2.
Install the Fax Connection Unit in the client machine (no fax unit is installed).
3.
Register the client machine on the remote machine.
•
Do not register the remote machine before the client machine is registered on the remote machine.
Otherwise, the remote machine cannot be registered.
4.
Register the remote machine in the client machine.
Description
1.Installation
Q'ty Remarks
1
27