Ricoh D3D9 Field Service Manual page 57

Code
15- Not Binary Image Data
71
15- MDN Status Error
73
15- MDN Message ID Error
74
15- Mail Job Task Read Error
80
15- Repeated Destination Registration Error
81
15- Send Registration Error
91
15- Memory Overflow
92
15- Memory Access Error
93
15- Incorrect ID Code
94
15- Transfer Station Function
95
16- No IP address registered
00
Meaning Suggested Cause/Action
•
Software error.
•
The file could not be received because the attachment
was not binary image data.
•
The disposition line in the header of the Return Receipt
could not be found, or there is a problem with the
firmware.
•
Could not find the Original Message ID line in the
header of the Return Receipt, or there is a problem
with the firmware.
•
Could not receive the transmission because the
destination buffer is full and the destination could not
be created (this error may occur when receiving a
transfer request or a request for notification of
reception).
•
Could not repeat receive the transmission because the
destination buffer is full and the destination could not
be created (this error may occur when receiving a
transfer request or a request for notification of
reception).
Could not receive the file for transfer to the final
destination:
•
The format of the final destination or the transfer
destination is incorrect.
•
Destinations are full so the final and transfer
destinations could not be created.
•
Transmission could not be received because memory
overflowed during the transaction.
•
Transaction could not complete due to a malfunction of
SAF memory.
•
The machine rejected an incoming e-mail for transfer
request, because the ID code in the incoming e-mail
did not match the ID code registered in the machine.
•
The machine rejected an incoming e-mail for transfer
because the transfer function was unavailable.
•
The machine does not get an IP address because the
DNS server has not been registered for the remote
machine or IP address of the remote machine has not
been registered.
3.Troubleshooting
53