Ricoh D3D9 Field Service Manual page 104

4.Service Tables
0 SEP reception
0: Disabled
1: Enabled
1 SUB reception
0: Disabled
1: Enabled
2 PWD reception
0: Disabled
1: Enabled
3- Not used
4
5 PSTN dial-in routing setting
0: OFF
1: ON
6 Not used
7 Action when there is no box with an
F-code that matches the received
SUB code
0: Disconnect the line
1: Receive the message
(using normal reception mode)
Communication Switch 18 (SP No. 1-104-025)
No Function
0-4 Not used
5 IP-Fax dial-in routing selection
0: Off
1: On
6 PSTN 2 dial-in routing
0: Off
1: On
7 PSTN 3 dial-in routing
0: Off
1: On
Communication Switch 19 - Not used (do not change the settings)
Communication Switch 1A - Not used (do not change the settings)
100
0: Polling transmission to another maker's machine using the SEP
(Selective Polling) signal is disabled.
0: Confidential reception to another maker's machine using the
SUB (Sub-address) signal is disabled.
0: Disables features that require PWD (Password) signal
reception.
Do not change the settings.
1: The machine sets multiple PSTN dial-in numbers in the PSTN
dial-in line and transfers received data from each PSTN dial-in
number to each address.
Do not change the settings.
Change this setting when the customer requires.
Comments
Do not change the settings.
1: Transfers received data to each IP-Fax dial-in number.
IP-Fax dial-in number is a 4-digit number.
Enables or disables dial-in routing for the PSTN 2 connection.
Enables or disables dial-in routing for the PSTN 3 connection.