Ricoh D3D9 Field Service Manual page 170

5.Detailed Section Descriptions
1. Unsupported MIME headers.
Supported types of MIME header
Header
Content-Type
Charset
Content-Transfer-
Encoding
2. MIME decoding errors
3. File format not recognized as TIFF-F format
4. Resolution, document size, or compression type cannot be accepted
Remaining SAF capacity error
The machine calls the server but does not receive e-mail if the remaining SAF capacity is less than a certain value
(the value depends on IFAX Switch 08. The e-mail will be received when the SAF capacity increases (for
example, after substitute reception files have been printed). The error handling method for this type of error is the
same as for "Abnormal files".
If the capacity of the SAF memory drops to zero during reception, the machine operates in the same way as when
receiving an abnormal file (refer to "Abnormal files" above).
Secure Internet Reception
To enable password encryption and higher level security: User Tools> System Settings> File Transfer>
POP3/IMAP4 Settings> Encryption (set to "On")
Transfer Request: Request By Mail
For details: Core Technology Manual – Facsimile Processes – Faxing from a PC – Internet/LAN Fax Boards –
Transfer Request
The fields of the e-mail and their contents are as follows:
Field
From
To
Bcc
Subject
Content-Type
Content-Transfer-Encoding
Mail body (text part)
Message body
166
Multipart/mixed, text/plain, message/rfc822 Image/tiff
US-ASCII, ISO 8859 X. Other types cannot be handled, and some garbage may
appear in the data.
Base 64, 7-bit, 8-bit, Quoted Printable
E-mail address of the requesting terminal
Destination address (Transfer Station address)
Backup mail address
From TSI (Fax Message No. xxxx)
Multipart/mixed
Text/Plain (for a text part), image/tiff (for attached files)
Base 64, 7-Bit, 8-bit, Quoted Printable
RELAY-ID-: xxxx (xxxx: 4 digits for an ID code)
RELAY: #01#*X#**01....
MIME-converted TIFF-F.
Supported Types
Content