Ricoh D3D9 Field Service Manual page 144

4.Service Tables
1: On
3 Not used
4 Line resolution of e-mail
attachment: 400 x 400
0: Off
1: On
5-
Not used
6
7 Designates the bits to reference for
original size of e-mail attachments
0: Registered (Bit 0 to 6)
1: No registration.
Switch 03 - Not used (do not change the settings)
Switch 04
No FUNCTION
0 Full mode address
selection
0: Full mode address
1: No full mode
(simple mode)
1- Not used
7
Switch 05
No FUNCTION
0 Directr transmission selection to SMTP
server
0: ON
1: OFF
1- Not used
7
Switch 06 - Not used (do not change the settings)
Switch 07 - Not used (do not change the settings)
Switch 08 - Not used (do not change the settings)
140
Do not change these settings.
Sets the line resolution of the e-mail attachment as 400 x 400.
Do not change these settings.
The "0" selection (default) references the settings for Bits 00, 01,
02, 04 above. The "1" selection ignores the selections of Bits 00,
01, 02, 04.
COMMENTS
If the other ends have the addresses, which have the full mode function flag
("0"), this machine determines them as full mode standard machines.
•
This machine attaches the "demand of reception confirmation" to a message
when transmitting.
•
This machine updates the reception capability to the address book when
receiving.
Do not change these settings.
COMMENTS
Allows or does not allow the direct transmission to SMTP
server.
Do not change these settings.