Printer Switches - Ricoh FAX3700l Service Manual

August 2nd, 1995

4.2.3. Printer Switches

Printer Switch 00
No FUNCTION
Page separation mark
0: Disabled
1: Enabled
0
Repetition of data when the
received page is longer than
1 the printer paper
0: Disabled 1: Enabled
2 Not used
Cleaning mode after bypass
feed
3 0: Disabled
1: After each page is fed
from the bypass feed slot
4 Not used
to
7
Printer Switch 01 - Not used (do not change the settings)
Printer Switch 02
No FUNCTION
Paper Feed Priority
0: Optional paper feed unit
> 100 sheet cassette >
Standard cassette
0
1: Optional paper feed unit
> Standard cassette > 100
sheet cassette
2 Not used
to
7
SERVICE TABLES AND PROCEDURES
COMMENTS
0: No marks are printed.
1: If a received page has to be printed out on two
sheets, an "x" inside a small box is printed at the
bottom right hand corner of the first sheet, and a "2"
inside a small box is printed at the top right hand
corner of the second sheet. This helps the user to
identify pages that have been split up.
0: The next page continues from where the previous
page left off.
1: The final few mm of the previous page are printed at
the top of the next page.
See section 2.2.12 for details.
Do not change the settings.
0: Cleaning mode is not done at all if bypass feed is
used.
1: Cleaning mode is done every time after a sheet of
paper is fed from the bypass feed slot.
Do not change the settings.
COMMENTS
This bit determines which set of priorities the machine
uses for feeding the paper when all the cassettes
contain the same paper size.
Do not change the settings.
4-27
BIT SWITCHES