Releasing Pressure Arms Individually (Vj-1938Wx/1638Wx Only) - MUTOH VJ-2638 Operation Manual

VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
3.4.5 Releasing pressure arms individually (VJ-1938WX/1638WX
only)
When printing on thin media or media without stiffness, the media rubs against the print head and
becomes dirty. In such a case, it may improve when releasing the pressure arms holding both sides of
media.
When releasing the pressure arms individually, always conduct media feed compensation.
NOTE
• This function is for VJ-1938WX/1638WX only.
• Thin media or media without stiffness is likely to be wrinkled during printing. Wrinkles can contact
the bottom side of the print head causing the media to become dirty. When both edges of the
pressure arms of media are released, it can prevent wrinkles.
1. Raise front or rear Media loading lever.
1
No.
1
2. Open the front cover.
No.
1
3.4 Loading media
Media loading lever
Front cover
Name
Name
Before using
1
1
101