MUTOH VJ-2638 Operation Manual page 348

Troubleshooting
(3) When data is sent from the computer, an error occurs at the printer and
nothing is printed
No. Possible cause
1 Is the type of printer selected correctly at the
computer?
2 Are the interface requirements and command
mode the same on the computer side and
printer side?
(4) Cannot use the computer online using LAN
No. Possible cause
1 Is Network interface cable connected
correctly?
2 Are the network settings configured
correctly?
3 Do the printer's network settings match the
computer's settings?
4 Does Power lamp on Operation panel blink
after sending printing data from the
computer?
348
VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
Remedy
Check that the printer type settings on the
computer side and printer side are the same.
Remedy
Confirm the types of the cross and straight
cables, and connect Network interface cable
correctly.
Configure the network settings correctly.
Match this product's network settings with the
computer side environment.
If Power lamp does not blink, contact the
computer manufacturer.
Reference
3.7
Connecting the
printer to PC
Reference
3.7.3
Connecting a
network interface
cable
5.1.23 IP
Address menu
5.1.25 Gateway
menu
3.7.1 System
requirements
—
7.1 Malfunctions and failures
to