MUTOH VJ-2638 Operation Manual page 146

Before using
5. "Pattern*1: 11" (refer to the chart below for *) is displayed on Operation panel.
• The pattern name indicated by * differs depending on the set print mode.
Print modes and corresponding pattern names are listed as follows.
Print Mode
Quality 1, 2
Quality 3, 4
Graphics 1, 2
Banner 1, 2
Banner 3, 4
NOTE
• Refer to the following for Print mode.
5.1.1.1.1 Print Mode menu
6. Press the [+] key or [-] key on Operation panel to enter the number that you selected in Step 4.
NOTE
• When you press the [Cancel] key on Operation panel, the setting value is not enterd and the display
returns to "Adj.2: Rough Pattern".
146
VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
Pattern name
C
B
B
A
A
3.6 Print quality adjustment