MUTOH VJ-2638 Operation Manual page 126

Before using
c. Press the [>] key on Operation panel.
• "Test1: Nozzle Check" is displayed on Operation panel.
d. Press the [+] key or [-] key on Operation panel to select "Test6: HeadAdjust>".
e. Press the [>] key on Operation panel.
• "HeadAdj.1: Standard" is displayed on Operation panel.
3. Press the [Enter] key on Operation panel.
• For VJ-2638/1638X, "Warming Up Skip ->E" is displayed on Operation panel.
(This is not displayed for VJ-1938WX/1638WX since it does not perform warming up.)
126
VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
3.5 Test print