VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
9. Press the [Enter] key on Operation panel.
•
The setting value is fixed.
•
When you have selected "AdjustALL" in step 4, Pattern*: 4 (refer to the chart below for *) is
displayed on Operation panel. Check the print result of the relevant pattern, and set the number
that is most aligned in the same way as steps 6 to 9. Once the settings for A to F have been
complete, Adj.1: AdjustALL is displayed on Operation panel.
•
When you have selected one of "Adjustment Pattern A" to "Adjustment Pattern F", "Adj.1:
AdjustALL" is displayed on Operation panel.
3.5 Test print
Before using
135