MUTOH VJ-2638 Operation Manual page 116

Before using
10. Press the release buttons on both sides of spectrophotometer, install it to the connector at the print
head.
1
No.
1
2
3
4
NOTE
• Make sure that spectrophotometer is NOT installed at an angle, and that there is no gap between the
connector and spectrophotometer.
11. Press the [Enter] key.
• "Wait for a while..." is displayed on the operation panel.
• The printer checks the connection between the printer and spectrophotometer.
• "Set white plate then close left maintenance cover." is displayed on the operation panel.
116
VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
2
Spectrophotometer
Release buttons
Print head section
Connector
1
Name
3 4
3.5 Test print