Panel setup menu
5.1.4
Media Set menu
Sets whether to detect the media width and edge while initializing the media.
NOTE
• When Media Detection menu is set to "Off", set the media width of the current media in Media
Width menu.
5.1.5 Media Width menu
• When the the media detection is set to "Off", the media cannot be cut automatically.
Setup item
Init.
252
VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
Setting
Off
Top&Width
<Width>
—
Description
The media will not be detected.
Detect the media width and edge while initializing the media.
Detect the media width while initializing the media.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
5.1 Setup menu