MUTOH VJ-2638 Operation Manual page 32

Product overview
(2) Rear section(VJ-1638X/1938WX/1638WX)
3 3
8
1 1
7 7
VJ-1638X VJ-1638X
5 5
No. Name
1 Roll media holder
2 Media feed slot
3 Ink cartridge slot
4 Media guide
5 AC inlet
6 Network interface cable
connector
7 Waste fluid valve
8 Media loading lever
32
VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
2 2
VJ-1938WX
VJ-1638WX
6 6 5
Load the roll media.
Equipped with Flanges to attach the roll media and Fixing levers to fix Roll media
holders.
Used for feeding media.
Insert Ink cartridges.
Used to feed the media smoothly when loading or printing on the media.
• Heater (Pre-heater) to dry ink is installed inside VJ-1638X.
• VJ-1938WX/1638WX is not equipped with Heaters.
Used for connecting the power cord set.
Connects a network interface cable.
Open/close when discharging the waste fluid from Waste fluid tank.
It is normally closed.
Used for fixing or releasing the media.
• Lower Lever to fix the media.
• Lower Lever further to fix the media firmly.
Used to improve the accuracy of media feeding.
• Raise Lever to release the media.
4 4
6
Function
2.2 Names of parts and functions
1 1