Cleaning Menu - MUTOH VJ-2638 Operation Manual

Panel setup menu
5.3

Cleaning menu

Performs head cleaning.
TIP
Head cleaning can be operated when the printer is Normal.
Refer to the following for operation procedures.
6.2.3 Head cleaning
Setup item Description
Short
Normal
Long
Little Charge
Initial ink charge
—
278
VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
— Discharges smaller amount of ink compared to "Normal".
• [Enter] key:
"Cleaning **%" is displayed on Operation panel and head cleaning starts.
Progress on the Head cleaning is displayed in % on Operation panel.
— Select this mode normally.
• [Enter] key:
"Cleaning **%" is displayed on Operation panel and head cleaning starts.
Progress on the Head cleaning is displayed in % on Operation panel.
— Discharges larger amount of ink compare to "Normal".
Used when Print head does not improve by normal head cleaning.
• [Enter] key:
"Cleaning **%" is displayed on Operation panel and head cleaning starts.
Progress on the Head cleaning is displayed in % on Operation panel.
— Refills a small amount of ink.
Charge a small amount of ink when printing is not stable after ink replenishment.
3.3 Filling ink
• [Enter] key:
"Ink Refill **%" is displayed on Operation panel and ink replenishment starts.
Progress on the ink replenishment is displayed in % on Operation panel.
Performs the intial ink charge.
—
Even when using the printer whose ink has already been filled, when you use High-
capacity ink pack adapter for the first time, perform this initial ink charge.
3.3.4 When using High-capacity ink pack adapter for the first time on
the printer whose ink is filled
Start • [Enter] key:
"Ink Refill **%" is displayed on Operation panel and ink replenishment starts.
Progress on the ink replenishment is displayed in % on Operation panel.
— • [Cancel] key: shifts to the previous menu.
5 Panel setup menu
Description
5.3 Cleaning menu