Standard Print Quality Adjustment - MUTOH VJ-2638 Operation Manual

VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
3.6.1

Standard print quality adjustment

Adjusts only the print mode in the user type setting which is currently set.
This menu consists of the following menus.
Menu name
Standard confirmation
pattern
Standard rough adjustment
pattern
Standard micro adjustment
pattern
Follow the procedure below to perform adjustment.
1. Print out the confirmation pattern and check the degree of misalignment.
3.6.1.1 Standard confirmation pattern
2. Perform rough adjustment when the degree of misalignment is big.
3.6.1.2 Standard rough adjustment pattern
Perform micro adjustment when the degree of misalignment is small.
3.6.1.3 Standard micro adjustment pattern
NOTE
• Perform rough adjustment first when the degree of misalignment is difficult to determine.
3. Print out the confirmation pattern again and check if the printer has been adjusted properly.
3.6.1.1 Standard confirmation pattern
4. If it has not been adjusted yet, return to step 2.
NOTE
• Perform micro adjustment if the printer is not fully adjusted after rough adjustment.
3.6 Print quality adjustment
Description
Print out the confirmation pattern and check the
degree of misalignment.
Perform this when the degree of misalignment is big.
Perform this when the degree of misalignment is
small.
Before using
Reference
3.6.1.1 Standard confirmation
pattern
3.6.1.2 Standard rough
adjustment pattern
3.6.1.3 Standard micro
adjustment pattern
137