Custom Print Quality Adjustment - MUTOH VJ-2638 Operation Manual

Before using
3.6.2

Custom print quality adjustment

Perform adjustment for all patterns (A to F).
All print modes will be adjusted.
This menu consists of the following menus.
Menu name
Custom confirmation pattern
Custom rough Rough
adjustment PatternALL
pattern
Individual Rough
Adj. pattern
Custom micro Adj. PatternALL
adjustment
pattern
Individual Adj.
pattern
Follow the procedure below to perform adjustment.
1. Print out the confirmation pattern and check the degree of misalignment.
3.6.2.1 Custom confirmation pattern
2. Perform rough adjustment when the degree of misalignment is big.
3.6.2.2.1 Rough Pattern ALL
Perform micro adjustment when the degree of misalignment is small.
3.6.2.3 Custom micro adjustment pattern
NOTE
• Perform rough adjustment first when the degree of misalignment is difficult to determine.
• Perform adjustment for A to F patterns if they are misaligned.
3. Print out the confirmation pattern again and check if the printer has been adjusted properly.
3.6.2.1 Custom confirmation pattern
4. If it has not been adjusted yet, return to Step 2.
154
VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
Description
Print out the confirmation patterns (A to
F) and check the degree of misalignment.
Perform this when the degree of
misalignment is big. All confirmation
patterns (A to F) will be adjusted.
Perform this when the degree of
misalignment is big. One of the
confirmation patterns (A to F) will be
adjusted.
Perform this when the degree of
misalignment is small. All confirmation
patterns (A to F) will be adjusted.
Perform this when the degree of
misalignment is small. One of the
confirmation patterns (A to F) will be
adjusted.
Reference
3.6.2.1 Custom confirmation
pattern
3.6.2.2.1 Rough Pattern ALL
3.6.2.2.2 Rough Pattern A to F
3.6.2.3.1 Fine Pattern ALL
3.6.2.3.2 Fine Pattern A to F
3.6 Print quality adjustment