Using Spectrophotometer (Vj-2638/1638X) - MUTOH VJ-2638 Operation Manual

VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
4.5

Using Spectrophotometer (VJ-2638/1638X)

NOTE
• VJ-1938WX/1638WX cannot be equipped with Spectrophotometer (SPECTROVUE VM-10).
The optional spectrophotometer (SPECTROVUE VM-10) can be attached to print and measure the color
target. Performing color calibration or profiling of the printer by using RIP software compatible with
SPECTROVUE VM-10 enables printing with more accurate colors.
For Software server RIP (option), contact MUTOH local dealer.
Follow the procedure below.
CAUTION
• When using VM-10, make sure to use the media whose thickness is less than
0.7mm. If you use the media thicker than 0.7mm, VM-10 and the media come into
contact and VM-10 may ben damaged.
NOTE
• Do not install the printer in a place that is subject to strong light (sunlight, etc).
Getting strong light on the color measurement may affect the measurement accuracy.
• To use Spectrophotometer (SPECTROVUE VM-10), the printer setting must be as follows. Make
sure the setting before use.
Media detection: Top&Width or Width
5.1.4 Media Set menu
Media ejection mode: Off or Auto Cut
5.1.6 Output Mode menu
Head height: Low or Mid
4.2.5 Head height adjustment
• When the color target is printed on the translucent or colored media, or the media with patterned
indented surfaces, color measurement may not be accurate.
• Read the Operation Manual of Spectrophotometer (SPECTROVUE VM-10) as well.
• When measuring colors, make sure that the color target is dry. If it is not dry enough, the ink may
adhere to the pressurizing rollers of the printer.
1. Connect the printer and computer.
3.7 Connecting the printer to PC
2. Turn the printer ON.
3. Set the media.
3.4 Loading media
4.5 Using Spectrophotometer (VJ-2638/1638X)
Handling the printer
217