Panel setup menu
5.1.29 Start Feed Menu
In the Start Feed menu, you can change the margin setting between images.
Setup Item
Start Feed
NOTE
• With take-up system: if you want to set "Start Feed" to below 0, set "Page Gap" to "Narrow".
If not, the Start Feed setting is not reflected properly.
5.1.6.2 Page Gap menu
276
VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
Description
-10 mm to <0 mm> to
500 mm
—
Setup Item
• Value over 0: The margin setting between images will be
wider than when setting "0".
• Value equal to 0: The default margin setting between
images will be applied.
• Value below 0: The margin setting between images will be
smaller than when setting "0".
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
5.1 Setup menu