VJ-1638/1638W OPERATION MANUAL
NOTE
• If the printer perform the nozzle check printing immediately after the initial ink replenishment
is complete, the following results may occur.
• Printed lines become blurred.
• The data is partially not printed.
In such cases, follow "5.3 Cleaning menu" and refill a small amount of ink. Then, check the
printing result.
If there is no improvement in the print result even after refilling a small amount of ink, leave
the printer unused for an hour or more. Then, refill a small amount of ink again and check the
print result.
If there is still no improvement, contact your local MUTOH dealer.
3.3.2
When using 440ml Ink cartridges (VJ-1638 only)
NOTE
440ml Ink cartridges are not compatible with VJ-1638W.
Follow the procedure below to install Ink cartridges.
1. Check the angle of Ink cartridge slot to see if the insertion angle of Ink cartridge is vertical.
1
No.
1
•
If the insertion angle of Ink cartridge is not vertical, change the angle.
3.3.3 Changing the angle of Ink cartridge slot
Ink cartridge slot
1
Name
3-23
3 Before using