Changing Torque Of Roll Media Holder - MUTOH VJ-2638 Operation Manual

VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
3.4.4

Changing Torque of Roll Media Holder

This section explains how to change the torque setting of the Roll media holder.
The 1 kg torque is usually used. When the media is creased or the print head might have a risk of striking
the media, change to the 4 kg torque.
NOTE
• VJ-2638 is not equipped with this function.
Follow the procedure below to change the torque setting of the Roll media holders.
1. Rotate the damper knob placed at the Roll media holder (the back left and right of the printer) by 90
degrees while pulling it out.
• When you rotate the damper knob by 90 degrees, it clicks into place. Rotating the damper knob
by 90 degrees alternately changes the 1 kg torque and 4 kg torque.
• Change the torque setting for both of the Roll media holders.
2
3
2
No.
1
2
3
3.4 Loading media
1
1
Media
Roll media holder
Damper knob
1
Name
Before using
2
3
2
99