MUTOH VJ-2638 Operation Manual page 293

VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
NOTE
• To use 1000ml Ink packs, High-capacity ink pack adapter (option) is required.
For details on High-capacity ink pack adapter, contact your local MUTOH dealer.
• Use genuine Ink cartridges for replacement.
This printer is designed to use genuine Ink cartridges and Ink packs.
If you use an ink bag that is not a product of the original manufacturer,
• Printing might become blurred, or the end of the ink in the pack might not be detected correctly.
• Any problems caused by using an ink bag other than those recommended above will not be
covered by the warranty, and repair expenses will be paid by the customer.
(3) Replacing steps
Follow the procedure below to replace Ink cartridges and High-capacity ink pack adapters.
CAUTION
• Before operation, make sure to read the Safety Data Sheet (SDS).
• When handling Ink cartridges or Ink packs, pay attention so that ink does not come
into contact with your eyes or skin.
If ink gets into your eyes or sticks to your skin, immediately wash it off with water.
Failing to do so might cause irritation or light inflammation of eyes.
In case of any abnormality, consult a physician immediately.
• Do not disassemble Ink cartridges or Ink packs.
If disassembled, ink might come into contact with your eyes or skin.
NOTE
• Do not use the Ink cartrdge(s) you have inserted into Ink cartridge slot(s) for other printers. The Ink
cartridge(s) will not be used again.
• Do not shake Ink cartridges or Ink packs strongly.
Doing so may cause ink leakage.
• Do not disassemble Ink cartridges.
A disassembled Ink cartridge or Ink packs cannot be used.
• When the Ink cartridge or Ink pack is moved from a cold place to a warm place, leave it for 3 hours
or more in the new printing environment before printing.
• Do not refill an ink cartridge or ink pack with ink.
It may result in abnormal printing.
• Insert or remove Ink cartridge and High-capacity ink pack adapter at the time of replacement only.
Otherwise, it may result in incorrect printing.
6.1 Replacing consumable components
Maintenance
293