VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
(1) Init.Adj.Print menu
Performs Initial Adjust Print.
Setup item
FeedLength
(2) Init.Adj.Change menu
Sets up Initial Adjust Change.
Setup item
Init.
(3) Confirm Print menu
Performs Confirm Print.
Setup item
FeedLength
5.1 Setup menu
Setting
100mm to <250mm> to
500mm
—
Setting
The setting value of
"FeedLength" in the initial
adjustment printing ±50.0mm
—
Setting
100mm to <250mm> to
500mm
—
Description
Changes the length (feed length) of the media feed direction
for initial adjust print.
• [Enter] key:
Determines the setting.
"Printing" is displayed on Operation panel and initial adjust
print starts.
After printing, the printer enters Normal.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.3 Media feed compensation
Description
Sets up Initial Adjust Change.
Example: When the value of "FeedLength" in the initial
adjustment printing is set to 250mm, the adjustment range of
this menu is 200mm to 300mm.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.3 Media feed compensation
Description
Changes the length (feed length) of the media feed direction
for Confirm Print.
• [Enter] key:
Determines the setting.
"Printing" is displayed on Operation panel and initial adjust
print starts.
After printing, the printer enters Normal.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.3 Media feed compensation
Panel setup menu
241