Step 4.
Continue to connect the other manifold sections working from the top down to the bottom.
Step 5.
Reinstall all drip sensor assemblies into chassis.
Drip sensor assembly
Figure 33. Drip sensor assembly installation
Step 6.
For the manifold water fill/refill process, at the rear of the rack, connect the blue hose assembly
(supplied to customer installation site) to the top quick connect at the top of the rack (location A).
Make sure the hose still remains in the bucket with the valve closed (valve handle perpendicular to
the hose).
Note: The red plug cover will need to removed at all positions first in order to plug to the quick
connects.
128
Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide
Drip sensor assembly
Connector
Latch