Lenovo NeXtScale nx360 M5 Installation And Service Manual page 147

Step 11. Again, at the back of the rack, insure the blue hose still remains connected to Location B. Open the
valve on the blue hose and leave in place until a steady stream of water flows into the bucket or
there are minimal bubbles in the sight-glass.
Figure 39. Hose assembly movement
Step 12. Close the valve on the blue hose. Then remove blue hose assembly from Location B and move to
Location A. Open the valve on the blue hose and allow this to stay in place until a steady stream of
water flows into the bucket or there are minimal bubbles in the sight-glass.
A
Chapter 6
B
.
Removing and replacing server components
133