Table of Contents
Advertisement
If you are replacing a server component in the water-cooled technology tray, you need to remove the water-
cooled technology tray from the chassis enclosure and refer to the "Removing a water-cooled technology
tray from a chassis" on page 139 and "Installing a water-cooled technology tray in a chassis" on page 140
sections.
To remove a HDD/SSD, complete the following steps:
Step 1.
Remove the cover (see "Removing the cover" on page 142).
Step 2.
Push the latch outward away from the HDD/SSD and slide the drive toward the front of the Lenovo
NeXtScale nx360 M5 water-cooled technology tray.
Figure 60. HDD/SSD removal
Step 3.
Tilt the HDD/SSD up.
Figure 61. HDD/SSDremoval
Step 4.
Remove the HDD/SSD from the drive cage with an angle.
152
Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide
2
Latch
1
Advertisement
Table of Contents
Troubleshooting
