and then release the interlock latch. The following illustration of the installation tool shows the
location of the interlock latch and counterclockwise rotation of the handle before loading the
microprocessor.
Figure 106. Installation tool handle adjustment
b.
Align the installation tool with the screws, as shown in the following graphic, and lower the
installation tool on the microprocessor. The installation tool rests flush on the socket only when
it is aligned correctly.
Installation tool
Microprocessor
Figure 107. Microprocessor installation
c.
Gently twist the handle of the installation tool clockwise until it locks in the "H" or "L" position,
depending on the size of microprocessor, and then lift the microprocessor out of the socket.
Screws
.
Chapter 6
Removing and replacing server components
183