Lenovo NeXtScale n1200 Installation And Service Manual

Hide thumbs
Lenovo NeXtScale n1200 Enclosure
Installation and Service Guide
Machine Type: 5456

   Related Manuals for Lenovo NeXtScale n1200

   Summary of Contents for Lenovo NeXtScale n1200

  • Page 1

    Lenovo NeXtScale n1200 Enclosure Installation and Service Guide Machine Type: 5456...

  • Page 2

    IBM Documentation CD. Sixth Edition (April 2017) © Copyright Lenovo 2017. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No.

  • Page 3: Table Of Contents

    Web ....124 Handling static-sensitive devices ..How to send DSA data to Lenovo ..124 Returning a device or component ..

  • Page 4: Table Of Contents

    ....132 Index ....137 Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 5

    Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza. Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet. Antes de instalar este produto, leia as Informações sobre Segurança. © Copyright Lenovo 2017...

  • Page 6: Safety Statements

    Be sure to read all caution and danger statements in this documentation before you perform the procedures. Read any additional safety information that comes with your system or optional device before you install the device. Statement 1 Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 7

    Do not: • Throw or immerse into water • Heat to more than 100°C (212°F) • Repair or disassemble Dispose of the battery as required by local ordinances or regulations. Statement 3 CAUTION: © Copyright Lenovo 2017...

  • Page 8

    Statement 4 CAUTION: Use safe practices when lifting. ≥ 18 kg (39.7 lb) ≥ 32 kg (70.5 lb) ≥ 55 kg (121.2 lb) Statement 5 Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 9

    Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. Statement 12 CAUTION: The following label indicates a hot surface nearby. © Copyright Lenovo 2017...

  • Page 10

    Statement 26 CAUTION: Do not place any object on top of rack-mounted devices. Statement 27 CAUTION: Hazardous moving parts are nearby. Statement 31 viii Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 11

    (60 V direct current). • Incorporate a readily available approved and rated disconnect device in the field wiring. • See the specifications in the product documentation for the required circuit-breaker rating for branch circuit overcurrent protection. © Copyright Lenovo 2017...

  • Page 12

    • Always install stabilizer brackets on the rack cabinet. • Always install servers and optional devices starting from the bottom of the rack cabinet. • Always install the heaviest devices in the bottom of the rack cabinet. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 13: Enclosure Type 5456

    It is a compact, high-density, high-performance, rack-mounted, scalable server platform system. The NeXtScale n1200 Enclosure Type 5456 chassis has twelve node bays. A 1-bay compute node occupies one node bay in the chassis. A 2-bay storage tray or GPU tray occupies two node bays in the chassis. The nodes share common resources, such as power and cooling in the chassis.

  • Page 14

    If the chassis comes with an RFID tag, it is attached to the upper-left corner of the bezel. The following illustration shows the location of the RFID tag on the front of the chassis. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 15: The Documentation Cd

    (if available). If a document is not available in the language for that region, the English-language version is displayed. Use one of the following procedures to start the Documentation Browser: Chapter 1 The NeXtScale n1200 Enclosure Type 5456...

  • Page 16: Related Documentation

    Click Help for detailed information about using the Documentation Browser. Related documentation This Installation and Service Guide contains general information about the NeXtScale n1200 Enclosure Type 5456 chassis including information to help you solve problems yourself and instructions for removing and installing components, and it contains information for service technicians.

  • Page 17: Brocade Documentation

    The documentation might be updated occasionally to include information about those features, or technical updates might be available to provide additional information that is not included in the server documentation. These updates are available from the website. To check for updates, go to http://www.lenovo.com/support. Brocade documentation Use this information to identify and locate related Brocade documentation.

  • Page 18: Features And Specifications

    • 1300-watt power supplies support high-line Vin (AC 200V – 240V) only. Electrical input: • Sine-wave input (50/60 Hz) required • Input voltage low range: – Minimum: 100 V AC – Maximum: 127 V AC • Input voltage high range: Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 19

    • Nominal - 213 CFM (at the acoustic fan speed) • Maximum - 614 CFM (at the fan full speed) Environment: The NeXtScale n1200 Enclosure complies with ASHRAE class A3 specifications. • Power on – Temperature: 5°C - 40°C (41°F - 104°F) –...

  • Page 20

    ISO 9296. Actual sound-pressure levels in a given location might exceed the average values stated because of room reflections and other nearby noise sources. The noise emission level stated in the declared (upper limit) sound-power level, in bels, for a random sample of system. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 21: Major Chassis Components

    Front view The following illustration shows the controls and connectors on the front of the server. For proper cooling, each bay in the chassis must contain either a device or a filler. Chapter 1 The NeXtScale n1200 Enclosure Type 5456...

  • Page 22: Rear View

    The NeXtScale n1200 Enclosure supports up to twelve 1-bay compute nodes. 1-bay compute node Figure 5. 1-bay compute node For more information about the compute nodes that are available for the NeXtScale n1200 Enclosure, see http://pic.dhe.ibm.com/infocenter/ flexsys/information/index.jsp?topic=%2F com.ibm.acc.common.nav.doc %2F compute_blades.html.

  • Page 23

    Fan modules, fan power control, and power supplies are in the rear of the NeXtScale n1200 Enclosure. Each bay in the chassis must contain either a device or a filler. The following illustration shows the connectors on the rear of the chassis.

  • Page 24

    Figure 8. Fan power control with call outs Fan power control indicators, controls, and connectors The fan power control has LEDs, controls, and connectors that you can use to obtain status information and restart the fan power control. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 25: Power Supplies

    This 10/100 base T Ethernet connector is usually connected to the management network through a top-of-rack switch. Power supplies The NeXtScale n1200 Enclosure supports six autoranging power supplies. The following illustration shows the AC power supply: Chapter 1...

  • Page 26

    Attention: The power supplies contain internal cooling fans. Do not obstruct the fan exhaust vents. The NeXtScale n1200 Enclosure does not support mixing of low input voltage power supplies with high input voltage power supplies. For example, if you install a power supply with an input voltage of 100 - 127 V AC in a chassis that is powered by 200 - 240 V AC power supplies, the 100 - 127 V power supply will not power on.

  • Page 27: Fan Modules

    The fan modules provide cooling to the compute nodes and the fan power control. The following is an illustration of the fan modules: Figure 11. Fan module Note: All of the fan modules are required to be installed in the NeXtScale n1200 Enclosure. Fan module controls and indicators Each fan module has one LED: Fault LED When this LED is lit (yellow), it indicates that the fan module has failed.

  • Page 28

    Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 29: Chapter 2. Error Messages

    This section provides the list of error codes and messages for fan power control that is generated when a problem is detected. See Appendix A “Fan power control (FPC) error codes” on page 85 for more information. © Copyright Lenovo 2017...

  • Page 30

    Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 31: Chapter 3. Parts Listing, Nextscale N1200 Enclosure Type 5456

    Tier 1 CRU at your request, you will be charged for the installation. • Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.

  • Page 32

    Power supply, 1300 watt, AC, Platinum Power supply, 1300 watt, AC, Platinum 94Y8183 Power supply, 1300 watt, AC, Titanium 00Y9107 Power supply, 1300 watt, AC, Titanium 94Y8179 Power supply, 1500 watt, Platinum 94Y8181 Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 33: Structural Parts

    IBM FPC. With a FPC 2 (Lenovo version) installed, on the other hand, only do upgrade with Lenovo firmware or replacement with another unit of Lenovo FPC 2. Note that if IBM FPC is plugged in Lenovo chassis, there will be VPD issue (see https://support.lenovo.com/solutions/ht501884 for more information).

  • Page 34: Power Cords

    For your safety, a power cord with a grounded attachment plug is provided to use with this product. To avoid electrical shock, always use the power cord and plug with a properly grounded outlet. Lenovo power cords used in the United States and Canada are listed by Underwriter's Laboratories (UL) and certified by the Canadian Standards Association (CSA).

  • Page 35

    Micronesia (Federal States of), Netherlands Antilles, Nicaragua, Panama, Peru, Philippines, Saudi Arabia, Thailand, Taiwan, United States of America, Venezuela 39M5076 United States of America 39M5512 39M5463 Taiwan 39M5087 Thailand 39M5219 Korea (Democratic People’s Republic of), Korea (Republic of) Chapter 3 Parts listing, NeXtScale n1200 Enclosure Type 5456...

  • Page 36

    Power cord part number Used in these countries and regions 39M5199 Japan 39M5068 Argentina, Paraguay, Uruguay 39M5226 India 39M5240 Brazil 39M5241 39M5375 Canada, Germany, United States of America 39M5378 39M5509 Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 37: Chapter 4. Removing And Replacing Components

    Tier 1 CRU at your request, you will be charged for the installation. • Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.

  • Page 38: System Reliability Guidelines

    For additional information about tools for updating, managing, and deploying firmware, see the ToolsCenter for System x and BladeCenter at https://support.lenovo.com/us/en/ documents/LNVO- CENTER • Before you install optional hardware, make sure that the compute nodes are working correctly. Start the...

  • Page 39: Handling Static-sensitive Devices

    Removing and replacing structural parts Replacement of structural parts is your responsibility. If Lenovo installs a structural part at your request, you will be charged for the installation. The illustrations in this document might differ slightly from your hardware.

  • Page 40: Replacing The Shipping Bracket

    Read the safety information that begins on “Safety” on page iii and “Installation guidelines” on page Step 2. Turn off the compute node and peripheral devices and disconnect the power cords and all external cables. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 41: Removing And Replacing Tier 1 Crus

    M5 hex head screws. Removing and replacing Tier 1 CRUs Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request, you will be charged for the installation.

  • Page 42: Removing A 1-bay Compute Node

    Replacing a 1-bay compute node Use these instructions to install a 1-bay compute node in the NeXtScale n1200 Enclosure. You can install a compute node while the chassis is powered on. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 43: Removing A Fan Module

    After you install the compute node, make a note of the compute node identification information on one of the labels that come with the NeXtScale n1200 Enclosure. Place a label on the node label tab and on the adjacent chassis label plate, to the right or left of the compute node (depending on the bay in which the compute nodes is installed).

  • Page 44: Replacing A Fan Module

    Replacing a fan module Use these instructions to install a fan module in the NeXtScale n1200 Enclosure. You can install a fan module while the NeXtScale n1200 Enclosure is powered on. To install a fan module, complete the following steps.

  • Page 45: Removing The Fan Power Control

    Slide the fan module into the chassis until it locks in place. Removing the fan power control Use these instructions to remove the fan power control from the NeXtScale n1200 Enclosure. 1. Disconnect all cables from the fan power control.

  • Page 46: Replacing An Fan Power Control

    Slide the module out of the fan power control bay and place it on a flat, static-protective surface. Replacing an fan power control Use these instructions to install an fan power control in the NeXtScale n1200 Enclosure. You can install an fan power control while the NeXtScale n1200 Enclosure is powered on.

  • Page 47: Removing The Battery From The Fan Power Control

    The following notes describe information that you must consider when replacing the battery. • Lenovo has designed this product with your safety in mind. The lithium battery must be handled correctly to avoid possible danger. If you replace the battery, you must adhere to the following instructions.

  • Page 48

    Read the safety information that begins on “Safety” on page iii and “Installation guidelines” on page Step 2. If the fan power control is installed in the NeXtScale n1200 Enclosure, remove it (see “Removing the fan power control” on page 33).

  • Page 49: Replacing The Battery In The Fan Power Control

    • To order replacement batteries, call 1-800-426-7378 within the United States, and 1-800-465-7999 or 1- 800-465-6666 within Canada. Outside the U.S. and Canada, call your Lenovo marketing representative or authorized reseller. • After you replace the battery, you must reconfigure the fan power control time settings.

  • Page 50

    Step 2. If the fan power control is installed in the NeXtScale n1200 Enclosure, remove it (see “Removing the fan power control” on page 33). Step 3. Make sure that the fan power control is on a flat, static-protective surface, with the release handle side up and the bezel pointing toward you.

  • Page 51: Removing The Usb Flash Drive

    Note: A USB flash drive must be installed for fan power control to maintain chassis settings after AC cycle. 1. Read “Safety” on page iii and “Installation guidelines” on page 25. 2. If the fan power control is installed in the NeXtScale n1200 Enclosure, remove it (see “Removing the fan power control” on page 33).

  • Page 52: Removing A Hot-swap Dc Power Supply

    • The DC supply source shall be located within the same premises as this equipment. • Switching or disconnecting devices shall not be in the earthed circuit conductor between the DC source and the point of connection of the earthing electrode conductor. Statement 31 Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 53

    DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: • Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. • Connect all power cords to a properly wired and grounded power source. •...

  • Page 54

    If only one power supply is installed, turn off the server and peripheral devices and disconnect all power cords. Step 3. Press and hold the release tab to the left. Grasp the handle and pull the power supply out of the server. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 55: Replacing A Hot-swap Dc Power Supply

    -48 volt DC power supply, and make the connections to and disconnections from the -48 volt DC power source. Lenovo service technicians are not certified or authorized to install or remove the -48 volt power cable. The customer is responsible for ensuring that only trained service personnel install or remove the -48 volt power cable.

  • Page 56

    • The DC supply source shall be located within the same premises as this equipment. • Switching or disconnecting devices shall not be in the earthed circuit conductor between the DC source and the point of connection of the earthing electrode conductor. Statement 31 Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 57

    DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: • Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. • Connect all power cords to a properly wired and grounded power source. •...

  • Page 58

    Attach the DC power cable to the new power supply. Figure 30. DC power supply rear view Step 5. If you are installing a hot-swap power supply into an empty bay, remove the power-supply filler from the power-supply bay. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 59

    Step 6. Grasp the handle on the rear of the power supply and slide the power supply forward into the power-supply bay until it clicks. Make sure that the power supply connects firmly into the power- supply connector. Power supply Figure 31.

  • Page 60: Removing An Ac Power Supply

    Use these instructions to remove an AC power supply from the NeXtScale n1200 Enclosure. Attention: • To maintain proper system cooling, do not operate the NeXtScale n1200 Enclosure without an AC power supply in each power supply bay. Install an AC power supply within 1 minute of the removal of a power supply.

  • Page 61: Replacing An Ac Power Supply

    Replacing an AC power supply Use these instructions to install an AC power supply in the NeXtScale n1200 Enclosure. You can install an AC power supply while the NeXtScale n1200 Enclosure is powered on.

  • Page 62

    Table 4. Compute nodes supported (low-line AC input, with 900-watt power supply x6) Non- redun- dant or N+1 # of micro- with Microprocessor N+N redundant N+1 redundant, N+N redundant, SKU (W) processor(s) with OVS , N=3 Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 63

    Table 4. Compute nodes supported (low-line AC input, with 900-watt power supply x6) (continued) Non- redun- dant or N+1 # of micro- with Microprocessor N+N redundant N+1 redundant, N+N redundant, SKU (W) processor(s) with OVS , N=3 Note: 1. OVS (Oversubscription) of the power system allows for more efficient use of the available system power.

  • Page 64

    # of micro- with Microprocessor N+N redundant N+1 redundant, N+N redundant, SKU (W) processor(s) with OVS , N=3 5 + 1 microprocessor node 4 + 1 5 + 1 microprocessor microprocessor node node Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 65

    Table 7. Compute nodes + two 225-watt GPUs supported (high-line AC input, with 1300-watt power supply x6) (continued) Non- redun- dant or N+1 # of micro- with Microprocessor N+N redundant N+1 redundant, N+N redundant, SKU (W) processor(s) with OVS , N=3 4 + 1 5 + 1 microprocessor...

  • Page 66

    N+1 # of micro- with Microprocessor N+N redundant N+1 redundant, N+N redundant, SKU (W) processor(s) with OVS , N=3 4 + 2 5 + 1 microprocessor microprocessor node node Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 67

    Table 9. Compute nodes + two 300-watt GPUs supported (high-line AC input, with 1300-watt power supply x6) (continued) Non- redun- dant or N+1 # of micro- with Microprocessor N+N redundant N+1 redundant, N+N redundant, SKU (W) processor(s) with OVS , N=3 3 + 2 4 + 2 microprocessor...

  • Page 68

    2. Align the power cord with the power-supply handle; then, secure the cord to the handle with the velcro strap. 3. Loop the power cord connector around and connect it to the power supply. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 69: Removing And Replacing Frus

    4. Push the power cord back through the strain-relief ties to remove excess cable from the loop. Removing and replacing FRUs Only Lenovo service technicians are authorized to install or replace FRUs. The illustrations in this document might differ slightly from your hardware.

  • Page 70

    Loosen the three captive screws that secure the chassis midplane to the chassis. Step 6. Lift up the chassis midplane half way. Put a screwdriver or a stick in the middle of the chassis midplane so your hands are free. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 71

    Figure 37. Removal of the chassis midplane from a chassis Step 7. Unplug the two fan cables on chassis midplane Step 8. Carefully grasp the chassis midplane and slide it away from the chassis. Note: Make sure that you do not grasp the connectors on the chassis midplane. You could damage the connectors.

  • Page 72: Replacing The Chassis Midplane

    (Trained service technician only) Use these instructions to install the chassis midplane in the NeXtScale n1200 Enclosure. To install the chassis midplane, complete the following steps. Step 1. Carefully align the chassis midplane with the guide pins in the chassis. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 73

    Figure 39. Installation of a chassis midplane into a chassis Step 2. Slide the chassis midplane half way into the chassis. Put a screwdriver or a stick in the middle of the chassis midplane so your hands are free. Chapter 4 Removing and replacing components...

  • Page 74

    Step 5. Tighten the three captive screws that secure the chassis midplane to the chassis. Step 6. Rotate the top cover inwards. Step 7. Tighten the three captive screws on the top cover. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 75

    Figure 41. Top cover inward rotation Reassemble the chassis and program the vital product data (VPD) that is stored on the card. Complete the following steps: 1. Reinstall the components that you removed from the rear of the chassis. 2. Connect any cables that you disconnected from the modules in the rear of the chassis. 3.

  • Page 76

    Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 77: Chapter 5. Using The Web Interface

    Chapter 5. Using the web interface Use this information to help you navigate the FPC web-based graphical user interface and manage components in the NeXtScale n1200 Enclosure. Starting the web interface Start the FPC web-based graphical user interface to manage components in the chassis.

  • Page 78

    Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 79: Chapter 6. Web Interface Options

    Click the chassis rear view drop down dialog box to display the System Information Quick View for overall system information. The power supply status table is placed in chassis rear view tab. © Copyright Lenovo 2017...

  • Page 80: Power Options

    The system fan status table is placed in chassis rear view tab. Power options There are five sections in the power tab. Power overview Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 81

    Voltage overview PSU configuration Chapter 6 Web interface options...

  • Page 82

    With shorter scanning period, power supplies are also turned on and off more frequently when system loading fluctuates, which could reduce the power supply life. Disable smart redundancy will always keep all power supplies active. Power cap Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 83: Cooling Options

    Power saving can be applied with power capping simultaneously. Description Mode Title Disable Static maximum The system runs at full speed (no throttling) regardless of performance the workload. Mode 1 Static minimum power The system runs in a throttled state (defined by the implementation) regardless of the workload.

  • Page 84

    Cooling overview Fan speed is displayed in RPM. Error log is asserted when fan speed is below lower critical threshold. PSU fan speed Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 85: System Information Options

    Acoustic mode To reduce the noise level of the chassis during run-time, you can configure the chassis to three different acoustic modes: • Mode 1: System fan speed is capped at 28% duty (7.5 bels) • Mode 2: System fan speed is capped at 34% duty (7.8 bels) •...

  • Page 86: Events Log Options

    Events menu and click Event Log. The following illustration shows the Event Log page. Note that event IDs are not shown in the Event Log page, by default. They must be manually enabled to display. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 87: Configuration Options

    USB recovery Configuration options Configuration tabs resides settings that are used to manage fan power control. There are eight sections in the configuration tab. Chapter 6 Web interface options...

  • Page 88

    Note: FPC will automatically reboot if you choose to cancel the firmware update process after uploading the firmware image. During updating, you are directed to a loading page where all FPC functions are locked. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 89

    Once the progress reaches 100%, FPC automatically reboots and you need to log in again to access FPC Web interface. SMTP/SNMP/PEF tabs Configured SMTP and SNMP traps allow you to monitor chassis for selected events. SMTP/SNMP trap event types can be set in the PEF (Platform Event Filter) tab. SMTP email-alert and SNMP trap can be enabled, configured, and tested in the SMTP and SNMP tabs respectively.

  • Page 90

    Note: Community Name displays/configures the SNMP community name using only alphabet and numerical values. The value must not be empty. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 91

    Network configuration Network configuration allows you to modify networking parameters: Hostname, DNS Domain Name, Auto Negotiation Mode, Network Speed, Duplex Mode, IP Version (IPv4, IPv6) Enable/Disable, IP Address, IP Source (Static, DHCP), Gateway, Subnet Mask, DNS Server, VLAN, and so on. Chapter 6 Web interface options...

  • Page 92

    Click on the item of Network Interface Configuration leads to the detail network settings. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 93

    Time setting This tab is used to configure system time. Select date and time and apply. Once they are set, the time is always kept even if you restore settings to default or uncheck Preserve Setting during firmware update. bestfit,bestfit,sfx)=}graphics:graphic5ff6887b} User account There are three types of user roles: •...

  • Page 94

    2. English uppercase characters (A through Z) 3. Base 10 digits (0 through 9) 4. Non-alphabetic characters (for example, !, $, #, %) If validation fails, the interface displays an error message. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 95

    Web service Web service let you configure different HTTP/HTTPS ports for connection and the Web page timeout period. Chapter 6 Web interface options...

  • Page 96

    Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 97: Appendix A. Fan Power Control (fpc Error Codes

    Indicate the actions that you should take to resolve the event. Perform the steps listed in this section in the order shown until the problem is solved. After you perform all of the actions that are described in this field, if you cannot solve the problem, contact Lenovo support.

  • Page 98: List Of Fan Power Control (fpc) Error Codes

    Complete the following steps: 1. If error is not de-asserted after several minutes, check all ten fans are installed. 2. Reseat fan module one or two times. If error still persist, replace fan module. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 99

    • 11 : FAN_Tach_1B: Fan sensor, failure event was asserted, reading value : %RPM (Threshold : 1472RPM) Asserted when Fan tach reading is below threshold RPM. Severity Critical Serviceable Automatically notify support User Response Complete the following steps: 1. If error is not de-asserted after several minutes, check all ten fans are installed. 2.

  • Page 100

    2. Reseat fan module one or two times. If error still persist, replace fan module. • 18 : FAN_Tach_5A: Fan sensor, failure event was asserted, reading value : %RPM (Threshold : 1472RPM) Asserted when Fan tach reading is below threshold RPM. Severity Critical Serviceable Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 101

    Automatically notify support User Response Complete the following steps: 1. If error is not de-asserted after several minutes, check all ten fans are installed. 2. Reseat fan module one or two times. If error still persist, replace fan module. • 19 : FAN_Tach_5B: Fan sensor, failure event was asserted, reading value : %RPM (Threshold : 1472RPM) Asserted when Fan tach reading is below threshold RPM.

  • Page 102

    2. Reseat fan module one or two times. If error still persist, replace fan module. • 20 : FAN_Tach_9A: Fan sensor, failure event was asserted, reading value : %RPM (Threshold : 1472RPM) Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 103

    Asserted when Fan tach reading is below threshold RPM. Severity Critical Serviceable Automatically notify support User Response Complete the following steps: 1. If error is not de-asserted after several minutes, check all ten fans are installed. 2. Reseat fan module one or two times. If error still persist, replace fan module. •...

  • Page 104

    Asserted when voltage sensed on coin battery output voltage is lower than lower criticl threshold (1.795V) Severity Critical Serviceable Automatically notify support User Response 1. Replace coin battery on FPC. • 40 : PS1_FANFault Power supply 1 fan has fail condition. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 105

    Severity Critical Serviceable Automatically notify support User Response Complete the following steps: 1. Check PSU power cord, reseat PSU. 2. If PSU Fan Fault is still asserted, replace PSU. • 41 : PS1_Thermal_Fault Power supply fan has thermal related fault, possibly over-heated condition. Severity Critical Serviceable...

  • Page 106

    If PSU orange LED is turned off under this circumstance, replace mid-plane. If LED is still lit, replace PSU. • 47 : PS1_AC_Lo_Line Power supply is connected to 110v AC. Severity Info Serviceable Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 107

    Automatically notify support User Response 1. No user action needed. • 48 : PS1_OT_Warning Power supply internal temperature has reached warning threshold. Over temperature fault is possibiliy to occur if condition not relieved. Severity Warning Serviceable Automatically notify support User Response Complete the following steps: 1.

  • Page 108

    Complete the following steps: 1. Check if PSU power cord is plugged. 2. Reseat components in the following order, continue down the list if OV fault is not de-asserted: Power supply, Mid-plane, All Nodes. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 109

    3. If PSU 12V AUX Fault is still asserted, replace PSU. • 55 : PS2_EPOW_Assert AC power provided to the indicated power supply is lost Severity Non-Recoverable Serviceable Automatically notify support User Response Complete the following steps: 1. Make sure PSU power cord is properly plugged in. Check if AC power is stable. •...

  • Page 110

    1. Check PSU power cord, reseat PSU. 2. If PSU Thermal Fault is still asserted, replace PSU. • 62 : PS3_12V_OV_Fault Power supply is having 12V power Over-Voltage condition Severity Critical Serviceable Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 111

    Automatically notify support User Response Complete the following steps: 1. Check if PSU power cord is plugged. 2. Reseat components in the following order, continue down the list if OV fault is not de-asserted: Power supply, Mid-plane, All Nodes. 3. If PSU 12V OV Fault is still asserted, replace PSU. •...

  • Page 112

    6. If condition presists after above inspection, reseat power supply. 7. If OT warning continues to present after power supply reseat, replace power supply. • 69 : PS3_No_Present Power supply was removed from chassis. Severity Info Serviceable Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 113

    Automatically notify support User Response 1. No user action needed. • 70 : PS4_FANFault Power supply 4 fan has fail condition. Severity Critical Serviceable Automatically notify support User Response Complete the following steps: 1. Check PSU power cord, reseat PSU. 2.

  • Page 114

    If PSU orange LED is turned off under this circumstance, replace mid-plane. If LED is still lit, replace PSU. • 77 : PS4_AC_Lo_Line Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 115

    Power supply is connected to 110v AC. Severity Info Serviceable Automatically notify support User Response 1. No user action needed. • 78 : PS4_OT_Warning Power supply internal temperature has reached warning threshold. Over temperature fault is possibiliy to occur if condition not relieved. Severity Warning Serviceable...

  • Page 116

    3. If PSU 12V UV Fault is still asserted, replace PSU. • 84 : PS5_12V_AUX_Fault Power supply is having faulty condition in providing 12V AUX power. Severity Critical Serviceable Automatically notify support Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 117

    User Response Complete the following steps: 1. Check if PSU power cord is plugged. 2. Reseat components in the following order, continue down the list if OV fault is not de-asserted: Power supply, Mid-plane, All Nodes. 3. If PSU 12V AUX Fault is still asserted, replace PSU. •...

  • Page 118

    Complete the following steps: 1. Check PSU power cord, reseat PSU. 2. If PSU Thermal Fault is still asserted, replace PSU. • 92 : PS6_12V_OV_Fault Power supply is having 12V power Over-Voltage condition Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 119

    Severity Critical Serviceable Automatically notify support User Response Complete the following steps: 1. Check if PSU power cord is plugged. 2. Reseat components in the following order, continue down the list if OV fault is not de-asserted: Power supply, Mid-plane, All Nodes. 3.

  • Page 120

    6. If condition presists after above inspection, reseat power supply. 7. If OT warning continues to present after power supply reseat, replace power supply. • 99 : PS6_No_Present Power supply was removed from chassis. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 121

    Severity Info Serviceable Automatically notify support User Response 1. No user action needed. • A0 : Node01_BMC_Fault The management device on indicated node is not responding. Severity Critical Serviceable Automatically notify support User Response Complete the following steps: 1. Reseat Node. If fault still persist, replace node. •...

  • Page 122

    Serviceable Automatically notify support User Response Complete the following steps: 1. Reseat Node. If fault still persist, replace node. • A8 : Node09_BMC_Fault The management device on indicated node is not responding. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 123

    Severity Critical Serviceable Automatically notify support User Response Complete the following steps: 1. Reseat Node. If fault still persist, replace node. • A9 : Node10_BMC_Fault The management device on indicated node is not responding. Severity Critical Serviceable Automatically notify support User Response Complete the following steps: 1.

  • Page 124

    Automatically notify support User Response Complete the following steps: 1. Make sure that all power supplies installed are Lenovo approved common form factor power supplies supported on this type of system. • AF : PSU_Policy_Loses Previously configured power supply redundancy policy is lost.

  • Page 125

    1. Make sure that all ten fans are installed. If all fans are confirmed to be present, reseat fan modules. If event persists after fan module reseat, replace fan modules. • B3 : FAN02_No_Present Indicated fan module is missing from fan bay or not properly installed. Severity Critical Serviceable...

  • Page 126

    If event persists after fan module reseat, replace fan modules. • BB : FAN10_No_Present Indicated fan module is missing from fan bay or not properly installed. Severity Critical Serviceable Automatically notify support User Response Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 127

    1. Make sure that all ten fans are installed. If all fans are confirmed to be present, reseat fan modules. If event persists after fan module reseat, replace fan modules. • BC : Zone %_FAN_FFS All system fans in indicated zone are running in full speed. Severity Warning Serviceable...

  • Page 128

    User performed virtual reseat operation on indicated node. Severity Info Serviceable Automatically notify support User Response 1. No user action needed. • C3 : Node_Reset_User User performed virtual reset operation on indicated node. Severity Info Serviceable Automatically notify support Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 129

    User Response 1. No user action needed. • C4 : Node_No_Present Node is not installed in the indicated slot. Severity Info Serviceable Automatically notify support User Response 1. No user action needed. • C5 : Node_DC_OFF Node is turned off(DC-Off) Severity Info Serviceable...

  • Page 130

    User input node level capping value is lower than the lowest capping value possible for this particular node, so the user input capping value may not be maintained. Severity Warning Serviceable Automatically notify support User Response Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 131

    Complete the following steps: 1. Remove FPC and check if embedded USB key is installed. 2. If not installed, install Lenovo USB key shipped with FPC. 3. If installed, reseat FPC one time. Replace the USB key if problem persists.

  • Page 132

    • D3 : FPC_REBOOT FPC was manually rebooted with hardware reset button, IPMI warm reboot command, or FPC web operation. Severity Info Serviceable Automatically notify support User Response Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 133

    1. No user action needed. • D4 : USER_RST_DEFAULT FPC network related settings were manually cleared and reset to out-of-factory default with one of the following actions: 1)Press hardware reset button for more than 4s. 2)Click on the "Reset to Default" button on the FPC web 'Chassis Rear Overview' page.

  • Page 134

    2. Ensure all connecting cable are plugged properly if trays are installed. 3. Replace the drip tray if the event continue to be asserted when tray is already confirmed to be installed. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 135: Appendix B. Getting Help And Technical Assistance

    Use this information to obtain additional information about Lenovo and Lenovo products, determine what to do if you experience a problem with your Lenovo system or optional device, and determine whom to call for service, if it is necessary.

  • Page 136: Using The Documentation

    • Secure upload with the system serial number: https://www.ecurep.ibm.com/ app/upload_hw Creating a personalized support web page You can create a personalized support web page by identifying Lenovo products that are of interest to you. To create a personalized support web page, go to http://www.ibm.com/support/ mynotifications. From this personalized page, you can subscribe to weekly email notifications about new technical documents, search for information and downloads, and access various administrative services.

  • Page 137: Hardware Service And Support

    To locate a reseller authorized by Lenovo to provide warranty service, go to http://www.ibm.com/ partnerworld and click Find Business Partners on the right side of the page. For Lenovo support telephone numbers, see http://www.ibm.com/planetwide. In the U.S. and Canada, call 1-800-Lenovo-SERV (1-800- 426-7378).

  • Page 138

    Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 139: Appendix C. Notices

    Adobe and PostScript are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Cell Broadband Engine is a trademark of Sony Computer Entertainment, Inc., in the United States, other countries, or both and is used under license therefrom. © Copyright Lenovo 2017...

  • Page 140: Important Notes

    Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 141: Particulate Contamination

    IT products. For information on recycling Lenovo products, go to: http://www.lenovo.com/ recycling. Particulate contamination Attention: Airborne particulates (including metal flakes or particles) and reactive gases acting alone or in combination with other environmental factors such as humidity or temperature might pose a risk to the device that is described in this document.

  • Page 142: Telecommunication Regulatory Statement

    Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Lenovo is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment.

  • Page 143: Germany Class A Statement

    Klasse A. Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo (Deutschland) GmbH, Meitnerstr. 9, D-70563 Stuttgart. Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4:Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse A.

  • Page 144: Japanese Electromagnetic Compatibility Statements

    Korea Communications Commission (KCC) statement This is electromagnetic wave compatibility equipment for business (Type A). Sellers and users need to pay attention to it. This is for any areas other than home. Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 145: Russia Electromagnetic Interference (emi Class A Statement

    Russia Electromagnetic Interference (EMI) Class A statement People's Republic of China Class A electronic emission statement Taiwan Class A compliance statement Appendix C. Notices...

  • Page 146: Taiwan Bsmi Rohs Declaration

    Taiwan BSMI RoHS declaration Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 147: Appendix D. German Ordinance For Work Gloss Statement

    The product is not suitable for use with visual display work place devices according to clause 2 of the German Ordinance for Work with Visual Display Units. Das Produkt ist nicht für den Einsatz an Bildschirmarbeitsplätzen im Sinne § 2 der Bildschirmarbeitsverordnung geeignet. © Copyright Lenovo 2017...

  • Page 148

    Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 149: Index

    Documentation Browser help Documentation CD from the World Wide Web using from World Wide Web documentation cd sending diagnostic data to Lenovo documentation, Brocade sources of documentation, updated hot-pluggable connectors finding hot-swap DC power supply DSA, sending data to Lenovo...

  • Page 150

    Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 151

    124–125 temperature ToolsCenter for System x and BladeCenter trademarks United States FCC Class A notice upgradeable microcode USB flash drive installing removing web interface fan power control 65, 67 weight X-architecture technology © Copyright Lenovo 2017...

  • Page 152

    Lenovo NeXtScale n1200 Enclosure Installation and Service Guide...

  • Page 154

    Part Number: 00MV719 Printed in China (1P) P/N: 00MV719...

  • Page 155

    *1P00MV719*...

Comments to this Manuals

Symbols: 0
Latest comments: