Table of Contents
Advertisement
Figure 67. Front view with HDDs/SSDs installed
Step 8.
Route the cables as the illustration displayed.
HDD power cable
SAS signal cable
Figure 68. Cable routings for the HDDs/SSDs power cables and the SATA signal cables
Step 9.
Reinstall the cover (see "Replacing the cover" on page 142).
Step 10. Slide the compute tray into the rack.
Step 11. Reconnect the power cords and any cables that you removed.
HDD/SSD drives
.
Chapter 6
Removing and replacing server components
155
Advertisement
Table of Contents
Troubleshooting
