Icom RS-BA1 Installation Manual page 88

4
SETTINGS FOR A REMOTE STATION PC
■ Server registration
D To add a Server (Continued)
Open the Add a Server screen.
1
1. Click the <Server List> tab.
2. Click <Add>.
Enter the Server Information.
2
1. Enter the Server Address or Network Name.
2. Confirm the Control port number.
L You should use the default port number for this
port.
3. Click <Next>>.
1Click
About Server Address or Network name
When connecting to the network through a PC
• When configuring the remote control system
through a LAN, enter IP address or computer
name of the Base station's PC. (pp. 38 to 44)
• When configuring the remote control system
through the Internet, enter domain name or public
IP address of the Base station's PC. (pp. 43 to
44)
When connecting to the network directly
• When configuring the remote control system
through a LAN, enter IP address of the radio or
network name*. (pp. 54 to 55)
• When configuring the remote control system
through the Internet, enter domain name or public
IP address of the Base station. (pp. 56 to 57)
* For only the IC-7851, IC-7850, and IC-7610.
60
2Click
1Enter
2Cofirm
3Click