Confirming Server Address Or Network Name; D When Configuring The Remote Control System Through A Lan; Dwhen Configuring The Remote Control System Through A Lan - Icom RS-BA1 Installation Manual

2
WHEN CONNECTING TO THE NETWORK THROUGH A PC

■ Confirming Server Address or Network Name

When you configure the remote system, Remote stations can access the Server using its IP address, computer
name, network name, or domain name.

D When configuring the remote control system through a LAN

If you configure the remote control system through a LAN, Remote stations can access the Server using its
computer name or IP address.
The example below describes how to find out the PC (Server)'s computer name, or IP address, to be requested
by Remote stations.
Base station
Icom radio
To let Remote stations access the Server using its computer name
A computer name is used on networks to identify a particular workstation on the network.
Find out your PC's computer name to let Remote stations access the Server using it.
Windows 10
1. Click the folder icon on the taskbar.
2. Right-click "This PC," and then click "Properties."
Right-click
PC
(Server)
IP address: 192.168.0.10
Computer name: Base PC
Click
Click
Router
Request "192.168.0.10"(IP address)
or "Base PC"(Computer name)
3. The "System" screen appears, then confirm the
name that is displayed in the Computer name
field.
Confirm
38
Remote station
PC