Icom RS-BA1 Installation Manual page 10

Installtion guide A
Step5. Settings on the Remote station's PC
This section describes how to setup the Remote station (Client) PC.
Before configuring the settings, connect a speaker and microphone, or headset to the Remote station's PC.
See the RS-BA1 Instruction Manual ("4. SETTINGS FOR A REMOTE STATION PC" section) for details.
Open the Remote Utility.
1
1. Double-click the "Remote Utility" icon on
your desktop to open the Remote Utility.
2. "Please set your own PC information" is
displayed, then click <OK>.
L When you first open the Remote Utility, this
screen is displayed.
Click
Configure the settings.
2
L When you first open the Remote Utility, this screen
is displayed.
Click <OK>, and then restart the Remote Utility.
1Enter
2Confirm
3Select
4Select
5Click
6Click
1. 2.
Click the Setup that you want to do.
3
L If no Servers and no radios are registered, this
screen is displayed.
Start the Setup Wizard.
4
Enter the Server Information.
5
A-10
3. 4. Step5.
Click
1Enter
2Click
6.
Click