Setting Your Pc's Environment - Icom RS-BA1 Installation Manual

2
WHEN CONNECTING TO THE NETWORK THROUGH A PC

■ Setting your PC's environment

Configure your PC's environment in the Base station's Remote Utility.
The settings will take effect after rebooting the Remote Utility.
When you first open the Remote Utility, the Settings screen appears.
After configuring the settings, you can display other setting screens.
1. Click "Options."
2. Click "Settings."
• The "Settings" screen is displayed.
3. Configure the settings.
4. Click <OK> to save the settings.
• The "Take effect after restarting the application"
screen is displayed.
5. Click <OK>.
The settings will take effect after rebooting the
Remote Utility.
PC Name
1
Enter a name for your PC of up to 16 characters.
DO NOT use the same name for more than one PC on your network.
Port numbers
2
Enter the port numbers of the Control, Serial, and Audio port.
You should use the default port numbers for these ports.
Internet Access Line
3
Select your internet access line type.
Language
4
Select the software display language.
The selected language will be used as the Help file language.
NOTE:
If you configure the remote control system through the Internet, and change the port number of the Control,
Serial or Audio port, you should configure the port forwarding settings and the IP filter settings on your router
once again. (p. 12)
3Set
23
1Click
2Click
1
2
3
4
4Click
5Click