Dto Add A User - Icom RS-BA1 Installation Manual

2
WHEN CONNECTING TO THE NETWORK THROUGH A PC
■ User registration (Continued)
D To add a user
Options > Local/Server Settings > User Management List
1. Click <Add>.
2. Enter a user ID of up to 16 characters, case-
sensitive.
L You cannot register an already registered ID.
3. Enter a password, of 8 to 16 characters, case-
sensitive.
L At least two different characters must be used.
4. Click <OK>.
To prevent unauthorized access:
Set a long and strong password so that no one can
possibly guess it.
Mix upper and lower case letters, numbers or
characters.
1Click
2Enter
3Enter
31
To set the user as
4Click
an administrator,
click to make a
check mark.