Icom RS-BA1 Installation Manual page 36

1
BEFORE USING REMOTE CONTROL SYSTEM
■ Volume adjustment for your audio devices (Continued)
Windows 8.1
1. Right-click the speaker icon on the taskbar, then
click "Playback devices" or "Recording devices."
w Click
q Right-click
2. The "Sound" screen appears, then click the
<Playback> tab.
In the list that appears, select the audio device
that you will use, then click <Properties>.
q Click
w Select
e Click
3. The "Speaker Properties" screen appears, then
confirm "Use this device (enable)" is displayed in
the Device Usage menu on the <General> tab.
q Click
w Confirm
4. Click the <Levels> tab.
Adjust the speaker's audio level by moving the
slide control to the right or left.
• If the mute setting is turned ON in "Speakers" (
click the icon to turn OFF.
5. After adjusting, click <OK> to close "Speaker
Properties."
q Click

8
w Adjust
e Click
☞ Continued on the next page.
),