Connecting To A Radio From The Server; Dconnecting To A Radio - Icom RS-BA1 Installation Manual

2
WHEN CONNECTING TO THE NETWORK THROUGH A PC

■ Connecting to a radio from the Server

When you are operating as a Base station, you can access a radio which is physically connected to your PC
(Server).
L For audio communication, you should connect a speaker and microphone, or headset to your PC.
L To control the radio, connect to it using a control software.
D Connecting to a radio
1. In the Base station's Remote Utility, click the
<Radio List> tab.
2. Select a radio which is physically connected to
your PC (Server).
3. Click <Connect>.
• A dialog showing a port number, which is used to
exchange CI-V commands between your PC and a
radio, is dispalyed.
4. Click <OK> to access the radio.
• "<<Connected>>" is displayed under the radio name
when the connection has succeeded.
L When you connect to the radio using a control
software, you have to set the port number shown
above.
TIP: When you change the radio settings,
1. In the Base station's Remote Utility, click the
<Radio List> tab.
2. Select a radio which is physically connected to
your PC (Server).
3. Click <Settings>.
L Radios that are connected with the Remote Utility
of the Server PC, the Connection Setting cannot be
changed.
4. Select an audio device in the Speaker menu to
which your speaker is connected.
• Radio's received audio will be heard from the
device.
5. Select the audio device in the Mic menu to
which your microphone is connected.
• You can input transmit audio in the device to send to
the radio.
6. Click <OK> to save the settings.
1Click
3Click
1Click
3Click
36
2Select
4Click
2Select
4Select
5Select
6Click