Isis Timer Hello - HP 5920 Series Command Reference Manual

Use undo isis timer csnp to remove the configuration.
Syntax
isis timer csnp seconds [ level-1 | level-2 ]
undo isis timer csnp [ level-1 | level-2 ]
Default
The default CSNP interval is 10 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
seconds: Specifies on the DIS of a broadcast network the interval in seconds for sending CSNP packets.
The value range is 1 to 600.
level-1: Applies the interval to Level- 1 .
level-2: Applies the interval to Level-2.
Usage guidelines
If no level is specified, the CSNP interval applies to both Level- 1 and Level-2.
This command only applies to the DIS of a broadcast network, which sends CSNP packets periodically
for LSDB synchronization.
Examples
# Configure Level-2 CSNP packets to be sent every 15 seconds over VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis timer csnp 15 level-2

isis timer hello

Use isis timer hello to specify the interval for sending hello packets.
Use undo isis timer hello to remove the configuration.
Syntax
isis timer hello seconds [ level-1 | level-2 ]
undo isis timer hello [ level-1 | level-2 ]
Default
The default hello interval is 10 seconds.
Views
Interface view
Predefined user roles
network-admin
239