HP 5920 Series Command Reference Manual page 219

IPV4 Dest : 8.8.8.0/24
Admin Tag : -
NextHop :
Direct
IPV4 Dest : 9.9.9.0/24
Admin Tag : -
NextHop :
8.8.8.5
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
IPV4 Dest : 8.8.8.0/24
Admin Tag : -
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
Table 64 Command output
Field
Route information for ISIS(1)
ISIS(1) IPv4 Level-1 Forwarding Table
ISIS(1) IPv4 Level-2 Forwarding Table
IPV4 Dest
Int. Cost
Ext. Cost
Admin Tag
Src Count
Flag
Next Hop
Interface
ExitIndex
-----------------------------
Level-1 IPv4 Forwarding Table
-----------------------------
Int. Cost : 10
Src Count : 2
Interface :
Vlan2
Int. Cost : 20
Src Count : 1
Interface :
Vlan2
Level-2 IPv4 Forwarding Table
-----------------------------
Int. Cost : 10
Src Count : 2
Description
Route information for IS-IS process 1.
IS-IS IPv4 routing information for Level-1.
IS-IS IPv4 routing information for Level-2.
IPv4 destination.
Internal cost.
External cost.
Tag.
Count of advertising sources.
Route state flag:
•
R—The route has been installed into the routing table.
•
L—The route has been flooded in an LSP.
•
U—Route leaking flag. Setting it to UP can prevent an LSP sent
from L2 to L1 from being sent back to L2.
Next hop.
Output interface.
Index of the output interface.
206
Ext. Cost : NULL
Flag : D/L/-
ExitIndex :
0x00000000
Ext. Cost : NULL
Flag : R/L/-
ExitIndex :
0x00000003
Ext. Cost : NULL
Flag : D/L/-