HP 5920 Series Command Reference Manual page 471

Field
Last exit reason
# Display detailed GR information for all OSPFv3 processes (GR restarter).
<Sysname> display ospfv3 graceful-restart verbose
OSPFv3 Process 1 with Router ID 3.3.3.3
Graceful-restart capability
Graceful-restart support
Helper capability
Helper support
Current GR state
Graceful-restart period
Number of neighbors under helper: 0
Number of restarting neighbors
Last exit reason:
Restarter: None
Helper : None
Area: 0.0.0.0
Area flag: Normal
Area up interface count: 1
Virtual-link Neighbor-ID: 100.1.1.1, Neighbor-state: Full
Description
Last exit reason:
•
Restarter—Reason that the restarter exited most
recently:
None.
Completed—GR is completed.
Interval timer is fired—The GR timer expires.
Interface state change—An interface state change
occurs.
Received 1-way hello—The device receives 1-way
hello packets from the neighbor.
Reset neighbor—The neighbor is reset.
DR or BDR change—The DR or BDR changes.
•
Helper—Reason that the helper exited most recently:
None.
Completed—GR is completed.
Received 1-way hello—The device receives 1-way
hello packets from the neighbor.
Grace Period timer is fired—The GR timer expires.
Lsa check failed—An LSA change on the GR helper
is detected.
Reset neighbor—The neighbor is reset.
Received MAXAGE gracelsa but neighbor is not
full—The device receives Grace-LSAs that reached
the maximum age, but the neighbor is not in Full
state.
: Enable
: Planned and un-planned, Partial
: Enable
: Planned and un-planned
: Normal
: 120 seconds
: 0
458