Trill Timer Csnp; Trill Timer Hello - HP 6125XLG Command Reference Manual

trill timer csnp

Use trill timer csnp to configure the CSNP interval.
Use undo trill timer csnp to restore the default.
Syntax
trill timer csnp interval
undo trill timer csnp
Default
The CSNP interval is 10 seconds.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Parameters
interval: Specifies the CSNP interval, which is in the range of 1 to 600 seconds.
Usage guidelines
On a broadcast network, the DRB advertises CSNPs at the CSNP interval to perform network-wide LSDB
synchronization. A CSNP records all LSP digests of the local LSDB. When an RB receives a CSNP, the RB
compares the CSNP against the local LSDB to verify whether some LSPs are aged out or missing. If the
CSNP has an LSP digest that the local LSDB does not have, the RB sends a PSNP packet to request the LSP
information.
Configuration in Ethernet interface view takes effect on only the current port. Configuration in aggregate
interface view takes effect on the current interface and its member ports. Configuration on the member
port of an aggregate interface takes effect after the member port leaves the aggregation group.
Examples
# Set the CSNP interval to 15 seconds on FortyGigE 1/1/1.
<Sysname> system-view
[Sysname] interface fortygige 1/1/1
[Sysname-FortyGigE1/1/1] trill timer csnp 15

trill timer hello

Use trill timer hello to configure the Hello interval.
Use undo trill timer hello to restore the default.
Syntax
trill timer hello interval
undo trill timer hello
Default
The Hello interval is 10 seconds.
27