If-Match Mpls-Label; If-Match Route-Type - HP 5920 Series Command Reference Manual

Default
No local preference match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
preference: Specifies a local preference in the range of 0 to 4294967295.
Examples
# Create node 10 in permit mode for routing policy policy1 to match BGP routes having a local
preference of 2.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match preference 2

if-match mpls-label

Use if-match mpls-label to specify the MPLS label match criterion.
Use undo if-match mpls-label to restore the default.
Syntax
if-match mpls-label
undo if-match mpls-label
Default
No MPLS label match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Examples
# Configure node 10 in permit mode for routing policy policy1 to match routes having MPLS labels.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match mpls-label

if-match route-type

Use if-match route-type to configure a route-type match criterion.
Use undo if-match route-type to remove the configuration.
568