Display Ipv6 Policy-Based-Route Local - HP 5920 Series Command Reference Manual

Table 136 Command output
Field
Policy based routing information for
interface Vlan-interface1(failed)
node 0 deny(not support)
node 2 permit(no resource)
if-match acl
apply next-hop
apply output-interface
Vlan-interface2 track 1 (down)
Matched: 0 (no statistics resource)
Total matched
Related commands
reset ipv6 policy-based-route statistics

display ipv6 policy-based-route local

Use display ipv6 policy-based-route local to display IPv6 local PBR configuration and statistics.
Syntax
display ipv6 policy-based-route local [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Description
IPv6 PBR configuration and statistics on Vlan-interface1.
failed indicates the policy (including all its nodes) failed to be assigned
to the driver.
For a global interface (with only one-dimensional interface number, for
example, VLAN-interface 1), failed can be displayed only when you
specify the slot slot-number option for the command.
Match mode of the node, permit or deny.
not support means the device does not support the match criteria
configured on the node. no resource means the device has insufficient
ACL resources, and failed to assign ACL resources to the node.
For a global interface (with only one-dimensional interface number, for
example, VLAN-interface 1), not support and no resource can be
displayed only when you specify the slot slot-number option for the
command.
Matches IPv6 packets against the IPv6 ACL.
Specify a next hop for permitted IPv6 packets.
Specify an output interface for permitted packets. The interface status
includes the following:
•
up—The interface is up.
•
down—The interface is down at network layer.
Number of successful matches on the node (no statistics resource
indicates insufficient statistics resources).
For a global interface (with only one-dimensional interface number, for
example, VLAN-interface 1), no statistics resource can be displayed only
when you specify the slot slot-number option for the command.
Total number of successful matches on all nodes.
545