Display Ospfv3 Nexthop - HP 5920 Series Command Reference Manual

Table 117 Command output
Field
SendCnt
RxmtCnt
Status

display ospfv3 nexthop

Use display ospfv3 nexthop to display OSPFv3 next hop information.
Syntax
display ospfv3 [ process-id ] nexthop
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not specify this
argument, the command displays next hop information for all OSPFv3 processes.
Examples
# Display next hop information for OSPFv3 process 1.
<Sysname> display ospfv3 1 nexthop
Nexthop : FE80::20C:29FF:FED7:F308
RefCount: 4
NbrID : 1.1.1.1
Nexthop : FE80::20C:29FF:FED7:F312
RefCount: 3
NbrID : 1.1.1.1
OSPFv3 Process 1 with Router ID 1.1.1.1
Description
Number of interfaces to send the LSA.
Number of LSAs in the link state retransmission list.
LSA status:
•
Normal.
•
Delayed.
•
Maxage routed—The LSA has reached its
maximum age.
•
Self originated.
•
Stale—A self-originated LSA is received during
the GR process.
Interface: Vlan2
Status
NbrIntID : 21
Interface: Vlan12
Status
NbrIntID : 38
467
: Valid
: Valid