HP 5920 Series Command Reference Manual page 351

Layer 3 - ip routing
Hide thumbs Also See for 5920 Series:
Table of Contents

Advertisement

In BGP IPv6 unicast address family view/BGP-VPN IPv6 unicast address family view:
network ipv6-address prefix-length short-cut
undo network ipv6-address prefix-length short-cut
Default
A received EBGP route has a preference of 255.
Views
BGP IPv4 unicast address family view, BGP-VPN IPv4 unicast address family view, BGP IPv6 unicast
address family view, BGP-VPN IPv6 unicast address family view
Predefined user roles
network-admin
Parameters
ip-address: Specifies an IPv4 network address. If the mask or mask-length is not specified, natural mask
is used.
mask: Specifies a mask of the network address in dotted decimal notation.
mask-length: Specifies a mask length in the range of 0 to 32.
ipv6-address: Specifies an IPv6 network address.
prefix-length: Specifies a prefix length in the range of 0 to 128.
Usage guidelines
Different routing protocols might find different routes to the same destination. However, not all of those
routes are optimal. For route selection, routing protocols, direct routes, and static routes are assigned
different preferences. The route with the highest preference is preferred.
By default, the preference of an EBGP route is lower than a local route. If a device has an EBGP route and
a local route to reach the same destination, the device does not select the EBGP route. You can use the
network shortcut command to configure the EBGP route to have the same preference as the local route
so the EBGP route is more likely to become the optimal route.
You can use the preference command to modify the preferences for external and local BGP routes.
Examples
# In BGP IPv4 unicast address family view, increase the preference of EBGP route 10.0.0.0/16.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family ipv4 unicast
[Sysname-bgp-ipv4] network 10.0.0.0 255.255.0.0 short-cut
# In BGP-VPN IPv6 unicast address family view, increase the preference of EBGP route 10::/16.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] address-family ipv6 unicast
[Sysname-bgp-ipv6-vpn1] network 10:: 16 short-cut
Related commands
preference
338

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5900 series

Table of Contents